RELAYOUT GUDANG FITTING PIPA DENGAN METODE SHARED STORAGE DI PT. TJAKRINDO MAS
DOI:
https://doi.org/10.31949/jensitec.v10i02.9247Abstrak
This analysis illustrates how changes in warehouse structure affect the smooth operation of a company or factory. At PT. Tjakrindo Mas, there is an irregular arrangement of finished product storage. causing a pile of goods that are not in accordance with the type so that during the retrieval process using a forklift there are difficulties due to the area that is not large so that it must be assisted with a hand pallet to carry the product to a wider area so that it can be reached by a forklift. That way it will waste a lot of time just because of the difficulty of wanting to transport goods. The method to be applied in the storage arrangement is the shared storage method, organised by placing finished products based on the FIFO (First In First Out) principle. This will minimise transport time as well as ensure efficient use of space.
Kata Kunci:
Warehouse Layout, Shareds Storage, FIFOUnduhan
Referensi
Christo, Clarissa Febian. PERANCANGAN SISTEM INFORMASI GUDANG UNTUK MENGURANGI RESIKO TERJADI SELISIH STOK DI PT KRAMBIL IDJO. Diss. Universitas Atma Jaya Yogyakarta, 2020.
Ekoanindiyo, Firman Ardiansyah, and Yaumal Agit Wedana. "Perencanaan tata letak gudang penggunakan metode shared storage di pabrik plastik Kota Semarang." Dinamika Teknik Industri (2012).
Ilham, Muhammad. "Perancangan Tata Letak Gudang Ekspor PT." Hadi Baru dengan Metode Shared Strage, Medan: Penelitian Mahasiswa Jurusan Teknik Industri Universitas Sumatra Utara diunduh di http://repository. usu. ac. id/bitstream/123 456789.11915 (2009): 1.
Pane, Moh Gunawan, and Handy Febri Satoto. "PENENTUAN WAKTU STANDAR GUNA MEMAKSIMALKAN KAPASITAS PRODUKSI PRODUK MEDIA TANAM." Jurnal Taguchi: Jurnal Ilmiah Teknik dan Manajemen Industri 3.1 (2023): 308-314.
Pangastuti, Puspita Arya, Farah Zahila, and Handy Febri Satoto. "OPTIMASI KUALITAS PRODUK DAN EFISIENSI PRODUKSI DENGAN METODE SIX SIGMA DI PT. SUMBER RUBBERINDO JAYA." JUSTI (Jurnal Sistem dan Teknik Industri) 3.4 (2023): 486-493.
PUTRA, HANDIKA SATYA. RANCANGAN TATA LETAK GUDANG UNTUK MENINGKATKAN EFEKTIVITAS PENYIMPANAN BAHAN BAKU PT PAPERTECH INDONESIA UNIT II MAGELANG. Diss. UNIVERSITAS MUHAMMADIYAH MAGELANG, 2021.
Sampurna, Edwin Ramadhani, Elisa Sulistyorini, and Handy Febri Satoto. "Hubungan Pengaruh Keselamatan dan Kesehatan Kerja Terhadap Perilaku Keselamatan Pekerja Konstruksi." SNHRP 2 (2019): 473-479.
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
Hak Cipta (c) 2024 Bella Kharisma, Handy Febri Satoto
Artikel ini berlisensiCreative Commons Attribution-ShareAlike 4.0 International License.
An author who publishes in the J-ENSITEC (Journal of Engineering and Sustainable Technology) agrees to the following terms:
- Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal
- The author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgment of its initial publication in this journal.
- The author is permitted and encouraged to post his/her work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work
