ANALISIS KARAKTERISTIK TEKANAN PEMBAKARAN MESIN DIESEL MENGGUNAKAN SOFTWARE SOFTHALIZA 8.7
DOI:
https://doi.org/10.31949/j-ensitec.v11i01.18278Abstrak
This study analyzes the combustion pressure characteristics of Diesel Engine #8 using SoftHaliza 8.7 software through the Pressure Combustion Analysis (PCA) method. The research aimed to evaluate the effect of fuel additive usage on combustion pressure performance in each cylinder. Data collection was conducted by measuring combustion pressure before and after the application of fuel additive under stable engine operating conditions.The analysis results showed that the use of fuel additive improved the combustion characteristics in all cylinders. The average combustion pressure increased from 56.50 bar before additive application to 67.99 bar after additive application, with an average deviation of 11.49 bar. The highest pressure increase occurred in Cylinder 4 with a deviation of 17.3 bar, while the lowest increase was observed in Cylinder 5 with a deviation of 8.9 bar. In addition, the combustion pressure graphs generated by SoftHaliza 8.7 indicated smoother and more stable expansion curves after additive application, reflecting a more complete combustion process and improved combustion efficiency.Overall, SoftHaliza 8.7 proved effective for monitoring combustion pressure characteristics, identifying combustion conditions in each cylinder, and supporting predictive maintenance activities to improve the reliability and operational performance of diesel engines.
Kata Kunci:
diesel engine; combustion pressure; SoftHaliza 8.7; pressure combustion analysis; fuel additive; predictive maintenance.Unduhan
Referensi
[1] Heywood JB. Internal combustion engine fundamentals. 2nd ed. New York: McGraw-Hill Education; 2018.
[2] Zheng M, Reader GT, Hawley JG. Diesel engine combustion analysis and emissions. Fuel. 2019;246:123-135.
[3] Taylor CF. The internal combustion engine in theory and practice. Cambridge: MIT Press; 2019.
[4] Reif K. Diesel engine management systems and components. Wiesbaden: Springer Vieweg; 2018.
[5] Payri F, Broatch A, Margot X. Pressure analysis techniques in diesel engines. Applied Thermal Engineering. 2020;170:114989.
[6] Rakopoulos CD, Giakoumis EG. Diesel engine transient operation. London: Springer; 2018.
[7] Li T, Zhang Z, Sun Y. Predictive maintenance technologies for diesel engine systems. Measurement. 2021;178:109328.
[8] Jardine AKS, Lin D, Banjevic D. Machinery diagnostics and prognostics implementing condition-based maintenance. Mechanical Systems and Signal Processing. 2019;20(7):1483-1510.
[9] Mohan B, Yang W, Chou SK. Fuel injection strategies and combustion characteristics in diesel engines. Fuel. 2021;104:669-678.
[10] Wang Y, Liu H, Wei L. Combustion diagnosis in diesel engines using in-cylinder pressure analysis. Energy Reports. 2021;7:1024-1032.
[11] Kumar N, Singh OP. Experimental investigation of combustion characteristics in CI engines. Case Studies in Thermal Engineering. 2020;21:100686.
[12] Zhao H. HCCI and CAI engines for the automotive industry. Cambridge: Woodhead Publishing; 2019.
[13] Jardine AKS, Tsang AHC. Maintenance, replacement, and reliability. Boca Raton: CRC Press; 2020.
[14] Bae C, Kim J. Alternative fuels for internal combustion engines. Proceedings of the Combustion Institute. 2020;37(1):3389-3413.
[15] Labeckas G, Slavinskas S. Combustion performance of diesel engines using fuel additives. Energy Conversion and Management. 2020;149:440-450.
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
Hak Cipta (c) 2024 Moch. Syaiful Anwar, Mochamad Shaleh
Artikel ini berlisensiCreative Commons Attribution-ShareAlike 4.0 International License.
An author who publishes in the J-ENSITEC (Journal of Engineering and Sustainable Technology) agrees to the following terms:
- Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal
- The author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgment of its initial publication in this journal.
- The author is permitted and encouraged to post his/her work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work
