PERANAN K3 PADA PEKERJAAN PEMELIHARAAN MESIN DIESEL RIG CARRIER C15 DENGAN MENGGUNAKAN METODE HIRARC: SEBUAH STUDI KASUS

Penulis

  • Iqbal Nazar Universitas Bojonegoro, Indonesia
  • Faisal Ashari Universitas Bojonegoro, Indonesia

DOI:

https://doi.org/10.31949/j-ensitec.v12i01.16470

Abstrak

Occupational Health and Safety (OHS) is a crucial aspect of every work activity, especially in the maintenance of heavy machinery such as the Diesel Rig Carrier CAT-15. This study aims to identify potential hazards, assess risk levels, and determine appropriate control measures using the HIRARC (Hazard Identification, Risk Assessment, and Risk Control) method in the maintenance activities of the Diesel Rig CAT-15 at PT. Tiga Musim Mas Jaya.The research method involved direct observation and analysis of nine main maintenance activities, namely checking the radiator, engine oil, transmission oil, hydraulic tank, spark arrestor, battery voltage, V-belt, Eagle box, and flywheel.

The hazard identification results found a total of 29 potential hazards with varying risk levels: 37.93% categorized as low risk, 44.83% as medium risk, and 17.24% as high risk. Following the implementation of risk controls based on the hierarchy of controls (elimination, substitution, engineering design, administrative measures, and the use of Personal Protective Equipment/PPE), all potential risks were successfully reduced to a low level.The conclusion of this study indicates that the systematic application of the HIRARC method can enhance the effectiveness of risk control and contribute to creating a safe and healthy work environment for employees. This approach is expected to be continuously implemented as part of the company’s OHS management system.

Kata Kunci:

HIRARC, K3, RIG C15

Unduhan

Data unduhan belum tersedia.

Referensi

[1] Chandra, C., Thomas, I., Adi, P., Industri, F. T., & Petra, U. K. (2023). Analisis Keselamatan Dan Kesehatan Kerja Dengan Menggunakan Metode Hirarc : Sebuah Studi Kasus Computer Science | Industrial Engineering | Mechanic Engineering | Civil Engineering J-Ensistec ( Journal Of Engineering And Sustainable Technology ) Computer Science | Industrial Engineering | Mechanic Engineering | Civil Engineering. 10(01), 892–899.

[2] Ramadhanti, C., Rahmadani, A. R., & Dewanti, D. W. (2023). Identifikasi Bahaya Dan Penilaian Risiko (Ibpr) Menggunakan Metode Hirarc Pada Pt Xyz. Jurnal Ilmiah Teknologi Infomasi Terapan, 9(2). Https://Doi.Org/10.33197/Jitter.Vol9.Iss2.2023.995

[3] Santoso, D. O., Kurniawan, M. D., & Hidayat, H. (2022). Analisa Risiko Keselamatan Dan Kesehatan Kerja Menggunakan Metode Hirarc Di Pt. Inhutani 1 Umi Gresikhutani 1 Umi Gresik. Jurnal Media Teknik Dan Sistem Industri, 6(1), 12. Https://Doi.Org/10.35194/Jmtsi.V6i1.1580

[4] Setiyawan, M. F. (2021). Analisa Risiko Keselamatan Dan Kesehatan Kerja. Jiso: Journal Of Industrial And Systems Optimization, 4(6), 48–54.

[5] Setyo Widodo, D. (2023). Determinasi Pelatihan, Keselamatan Dan Kesehatan Kerja (K3) Terhadap Kepuasan Kerja. Jurnal Ilmu Multidisplin, 1(4), 956–962. Https://Doi.Org/10.38035/Jim.V1i4.177

[6] Syahyuni, D. (2019). Hubungan Antara Keselamatan Dan Kesehatan Kerja (K3) Dan Motivasi Kerja Dengan Kepuasan Kerja Karyawan Dada Suku Dinas Penanggulangan Kebakaran Dan Penyelamaan Kota Administrasi Jakarta Selatan. Perspektif, 17 No. 2(2), 170. Https://Ejournal.Bsi.Ac.Id/Ejurnal/Index.Php/Perspektif/Article/View/6455

[7] Firmansyah, A. M., & Waluyo, M. (2024). Mengidentifikasi Dan Menanggulangi Risiko Di Pt.Xyz Menggunakan Metode Hirarc. Sammajiva : Jurnal Penelitian Bisnis Dan Manajemen, 2(1), 13–29.

[8] Lutfia, T., Ali, S., & Galuh, H. (2025). Analisa Resiko Keselamatan Dan Kesehatan Kerja Di Pt . Industri Kemasan Semen Gresik Dengan Metode Hirarc. 8(1), 92–96.

[9] Maliza, N. O., Widy, C., Putri, A., Studi, P., Hasil, T., Pertanian, F., Umar, U., Akutansi, P. S., Ekonomi, F., & Umar, U. (N.D.). Evaluasi Kesehatan Dan Keselamatan Kerja Pada Stasiun Sterilizer Dengan Metode Hirarc Di Pt . Beurata Subur Peusada.

Unduhan

Abstract Views : 60
Downloads Count: 43

Diterbitkan

2025-12-08

Cara Mengutip

Nazar, I., & Ashari , F. (2025). PERANAN K3 PADA PEKERJAAN PEMELIHARAAN MESIN DIESEL RIG CARRIER C15 DENGAN MENGGUNAKAN METODE HIRARC: SEBUAH STUDI KASUS . J-ENSITEC , 12(01), 10306–10314. https://doi.org/10.31949/j-ensitec.v12i01.16470

Terbitan

Vol 12 No 01 (2025): December 2025

Bagian

Articles

Lisensi

Hak Cipta (c) 2025 Iqbal Nazar, Faisal Ashari

Creative Commons License

Artikel ini berlisensiCreative Commons Attribution-ShareAlike 4.0 International License.

An author who publishes in the J-ENSITEC (Journal of Engineering and Sustainable Technology)  agrees to the following terms:

  1. Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal
  2. The author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgment of its initial publication in this journal.
  3. The author is  permitted and encouraged to post his/her  work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work