ANALISA POSTUR DAN MOOD PEKERJA PEMOTONGAN BEBEK DALAM PENINGKATAN PRODUKTIVITAS

Penulis

  • Diyah Dwi Nugraheni Universitas Islam Indonesia, Indonesia
  • Ayudyah Eka Apsari Universitas Islam Indonesia, Indonesia
  • Hardik Widananto Indonesia

DOI:

https://doi.org/10.31949/j-ensitec.v12i01.14148

Abstrak

Comfort at work is an important factor in the production process. By paying attention to comfort at work, it will reduce the complaints at work. Uncomfortable working places and conditions can cause losses and even accidents for employees. One of the consequences of a lack of comfort and safety in working conditions is musculoskeletal disorders. This study took place in one of the ducks cutting businesses located in Sidowayah Village, Klaten, Central Java. Workers in this business still show several less ergonomic working positions, this is indicated by the many complaints of fatigue and work-related diseases felt by workers. ith complaints from workers who show indications of work-related diseases occurring in the upper body, this problem can be solved by the Rapid Upper Limb Assessment (RULA) Method. In addition, the mood factor of the workers themselves also affects worker productivity, worker mood analysis is measured using the Profile of Mood States (POMS) Method. The results of the measurements showed that workers in this duck cutting business still need to improve their workstations. The posture values ​​obtained were 6, 4 and 5, indicating fatigue among the three workers with recommendations for improvement. Meanwhile, for the analysis of the mood of workers, it can be concluded that workers have different moods before and after work. The difference in mood shows results that are not too significant so that it can be interpreted that workers do not experience significant stress during work.

Kata Kunci:

Musculoskeletal disorders, RULA, POMS

Unduhan

Data unduhan belum tersedia.

Referensi

[1]Ahmad, N. P., Hidayat, R. & Hamdani, R., 2020. Analisis Postur Kerja dengan Metode RULA pada Operator Las di bengkel Las Sumber Jaya Bekasi, Jawa Barat. Bulletin of Applied Industrial Engineering Theory , pp. 59-63.

[2]Anggraini, D. T. C., Herwanto, D. & Nugroho, R. E., 2022. Analisis Postur Kerja Karyawan Menggunakan Metode RULA. SITEKIN: Jurnal Sains, Teknologi dan Industri, pp. 147-155.

[3]Dewanti, G. K. & Perdana, S., 2020. Analisis Postur Kerja Pada Karyawan Bengkel Warlok Barbeku Multi Servis dengan Menggunakan REBA. Jurnal IKRA-ITH TEKNOLOGI, 4(3), pp. 57-64.

[4]Hidayat, A. H., 2022. Mewujudkan TPS Pemilu yang Nyaman dalam Upaya Meminimalisir Kelelahan Petugas KPPS: Kajian Ergonomi. Jurnal Inovasi Teknik Industri (JITIN), pp. 49-58.

[5]Hunusalela, Z. F., Perdana, S. & Dewanti, G. K., 2022. Analisis Postur Kerja Operator Dengan Metode RULA dan REBA Di Juragan Konveksi Jakarta. Jurnal IKRAITH-TEKNOLOGI.

[6]Rozi, F. & KN, H., 2021. Analisis Postur Kerja Operator SEWING dengan Metode RULA di Tara Toys Mart. Jurnal Baut dan Manufaktur , pp. 41-47.

[7]S., Pusporini, P. & Ismiyah, E., 2020. Analisis Postur Kerja Operator Sablin Karung dengan Metode RULA dan WERA. JUSTI (Jurnal Sistem Dan Teknik Industri), pp. 591-608.

[8]Wahyudi & Fajarwati, 2020. Profil Mood Atlet Pra-PON Sepak Takraw Puteri Sulawesi Tengah dalam Melakukan Latihan. Journal Sport Area, pp. 164-176.

Unduhan

Abstract Views : 48
Downloads Count: 37

Diterbitkan

2025-12-08

Cara Mengutip

Nugraheni, D. D., Eka Apsari, A., & Widananto, H. (2025). ANALISA POSTUR DAN MOOD PEKERJA PEMOTONGAN BEBEK DALAM PENINGKATAN PRODUKTIVITAS. J-ENSITEC , 12(01), 10288–10292. https://doi.org/10.31949/j-ensitec.v12i01.14148

Terbitan

Vol 12 No 01 (2025): December 2025

Bagian

Articles

Lisensi

Hak Cipta (c) 2025 Diyah Dwi Nugraheni, Ayudyah Eka Apsari, Hardik Widananto

Creative Commons License

Artikel ini berlisensiCreative Commons Attribution-ShareAlike 4.0 International License.

An author who publishes in the J-ENSITEC (Journal of Engineering and Sustainable Technology)  agrees to the following terms:

  1. Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal
  2. The author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgment of its initial publication in this journal.
  3. The author is  permitted and encouraged to post his/her  work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work